CHANGEOVER SET 160/240X160/240HD2-LS

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth CHANGEOVER SET (3842563536) is a comprehensive solution designed to enhance the flexibility and efficiency of material handling systems. This set is specifically tailored for precise and smooth changeovers in conveyor systems, enabling the turning of workpiece pallets on the Z-axis. It offers two options for lifting heights, either 160 mm or 240 mm, making it versatile enough to handle workpiece pallets with varying sizes and side-mounted components such as identification and data storage modules. The model with a 160 mm lift is ideal for rotating pallets directly above the conveyor section, whereas the 240 mm lift version accommodates additional elements attached to the pallet. With a maximum permitted total mass moment of inertia of 0.35 kgm², this changeover set can handle substantial loads while maintaining operational integrity. The product group ID indicates its categorization within Bosch Rexroth's line of material handling components, ensuring compatibility with other system elements. Included in the scope of delivery are all necessary fastening materials required for installation. However, it is important to note that additional accessories are needed for optimal functionality. A stop gate VE... and a sensor with a rated sensing range of SN 3 mm are required accessories; these ensure proper detection and control during operation. The sensor cannot be installed flush but requires a spacing of 0.8 mm. In summary, the Bosch Rexroth CHANGEOVER SET is an integral component for automated material handling systems that require reliable changeover capabilities with different lifting height options to accommodate various application needs while ensuring smooth operation through its specified mass moment of inertia specifications.