POSITIONING UNIT PE-VF/C

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth POSITIONING UNIT PE-VF/C (3842557090) is a high-precision component designed for seamless integration into conveyor systems, particularly where clean ambient conditions are maintained. This positioning unit is engineered to lift the workpiece tray (WT) approximately mm above the transport level, allowing for processing without imposing any load on the conveyor chain. For environments that are not as clean, Bosch Rexroth offers an alternative model, the PEVFH. The PE-VF/C boasts impressive positioning accuracy with tolerances of mm in the direction of transport, mm transversely, and mm in height. It can exert a maximum vertical press force of N at p bar and retains a maximum force of N in the direction of transport at the same pressure. Additionally, it can handle a maximum permissible torque in the plier area of Nm. This unit is designed for easy retrofitting and does not require modifications to existing lateral guides. The switch bracket is versatile and can be installed in any position to accommodate various system configurations. To integrate this positioning unit, workpiece pallets must meet minimum length requirements: Size 1 requires L mm and Size 2 requires L mm. When dealing with workpiece pallets that are L mm in length, two PE-VF/C units can be combined by removing one positioning mandrel and fitting eccentric centering bushings provided by the customer. Although position inquiry parts are not included with the delivery, it requires one sensor Mx b b and two switch brackets (SH HQR b b and SH HQL b b) for operation. The product group ID indicates that this unit is made from diecast aluminum with additional components such as steel fastening parts that are galvanized, cover caps made from PA, and clamping claws crafted from PU. The package includes necessary fastening parts as shown, but it requires additional accessories such as throttle check valves G for complete functionality.