CURVE 160+ VERT STS 15°R500

Manufacturer: Bosch Rexroth

Material #: 3842547148

Model : CURVE 160+ VERT STS 15

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth CURVE 160+ VERT STS 15?R500 (3842547148) is a meticulously designed vertical curve component for conveyor systems, specifically tailored for the STS VFplus line. This model is engineered to facilitate smooth transitions from horizontal to vertical conveying paths and vice versa, accommodating a deflection angle that enhances operational flexibility within material handling setups. The product comes with an effective sliding rail length and an actual chain length, both of which are integral to its performance. The weight of the unit is also specified, ensuring users can plan for appropriate load capacities. This CURVE model is supplied fully assembled, including fastening materials for easy mounting onto STS section profiles. It requires slide rails for operation, with the length calculation dependent on the size 'b' and dimension 'A'. The construction of this vertical curve boasts nonrusting steel in its profile, connector, and support profile from size onwards, ensuring durability and longevity even in demanding environments. The CURVE 160+ VERT STS 15?R500 is versatile enough to handle all deflection angles and radii while being compatible with any chain type used within the system. It's designed for use with either Advanced or Premium slide rails, which must be selected based on specific application requirements. This component is particularly recommended for use at the infeed and outfeed points of wedge conveyors dealing with small products due to its ability to increase chain tensile force through friction during elevation changes. Its open section profile version further adds to its applicability across various conveyor configurations.

$1,014.13 USD

More are expected on December 2, 2024

Add to Cart

Status: This product is temporarily out of stock.

Qty: Delivered as early as December 2, 2024 when ordered in

CURVE 160+ VERT STS 15°R500

Vertical curve STS VFplus 160 15°

Unpacked Weight: 2.594 kg

The vertical curve is used for the transition from a horizontal conveyor section to an ascending section and vice versa. The chain tensile force is increased through the ensuing friction.

A vertical curve of 5° is recommended for the infeed and outfeed on the wedge conveyor, especially with small products.

Size: all Deflection angles and radii Suitable chain types: all Version with open section profiles Requires the use of the Advanced or Premium slide rails

Data Sheet	Download Data Sheet
3D CAD	Download 3D CAD

Deflection angle [α]	15
Productgroup ID	2
Effective sliding rail length	8x 0,33
Actual chain length	2x 0,33
Weight	2.594
Notice	Effective sliding rail length with support profile
Scope of delivery	Incl. fastening material for mounting to STS section profiles
Delivery information	Fully assembled
Required accessories	Slide rail: Length calculation
Size [b]	160
Dimension [A]	334.9
Material information	Profile: Non-rusting steel 1.4301,Connector: Non-rusting steel 1.4301,Support profile from size 160: Non-rusting steel 1.4301

Combination matrix

		Straight			Curves			Drives			Return Unit
		Section profile STS open	Section profile STS Clean	Assembly module	Curve wheel	Roller curve*	Vertical curve	Head drive	Connection drive	Center drive**	Basic unit	90° **
Straight	Section profile STS open	J
	Section profile STS Clean	L6)	L6)
	Assembly module	J	L6)	N
Curves	Curve wheel	J	L6)	J	L2, 7)
	Roller curve*	J	N	J	N	L1)
	Vertical curve	J	L6)	J	L1)	L1)	L1)
Drives	Head drive	J	L6)	J	L1)	L1, 4)	L1, 4)	N
	Connection drive	J	L6)	J	L1)	N	L1)	N	N
	Center drive**	J	L6)	J	L1)	N	L1)	N	N	N
Return Unit	Basic unit	J	L6)	J	L1)	L1, 4)	L1, 4)	L1)	L1)	L1, 3)	L1, 3)
Return Unit	90° **	J	L6)	J	L1)	N	L1)	L1)	L1)	N	N	L1)
J	possible without restrictions		* Support profile must project 76+2 mm into the roller curve.
L	possible with restrictions		** AL-STS adapter included in the scope of delivery.
N	not possible

1)	Profile connector not required
2)	Use of a profile piece (Lmin = 224 mm)
3)	Assembly module required
4)	For sizes 160-320: shorten the support rail on the dotted line
5)	Use of the AL-STS adapter
6)	Replace the standard profile connector with STS Clean Section profile connector
7)	Directly possible with left-right change (one profile connector is no longer required)

Vertical curve STS

Vertical curve STS VFplus 5°

Vertical curve STS VFplus 15°

Vertical curve STS VFplus 30°

Vertical curve STS VFplus 45°

b	α	A	C	R
mm	°	mm	mm	mm
65	5	246.2	79.5	500
	15	334.9	110.7	500
	30	453.9	181.4	500
	45	548.7	276.1	500
90	5	246.2	79.5	500
	15	334.9	110.7	500
	30	453.9	181.4	500
	45	548.7	276.1	500
120	5	246.2	79.5	500
	15	334.9	110.7	500
	30	453.9	181.4	500
	45	548.7	276.1	500
160	5	246.2	79.5	500
	15	334.9	110.7	500
	30	453.9	181.4	500
	45	548.7	276.1	500
240	5	246.2	79.5	500
	15	334.9	110.7	500
	30	453.9	181.4	500
320	5	246.2	79.5	500
	15	334.9	110.7	500
	30	453.9	181.4	500

Slide rail

Easy assembly - simply clip onto the section profile Secured against axial shifting due to lateral bolting

CAD data

CURVE 160+ VERT STS 15°R500

Manufacturer: Bosch Rexroth

Material #: 3842547148

Model : CURVE 160+ VERT STS 15

More are expected on December 2, 2024

Combination matrix

Vertical curve STS

Vertical curve STS VFplus 5°

Vertical curve STS VFplus 15°

Vertical curve STS VFplus 30°

Vertical curve STS VFplus 45°

Slide rail

Slide rail

Related Products

Information

Account