Position monitoring kit
The plier-shaped form of the positioning unit (PE) makes it highly resistant to dirt and shavings and thus suitable for dirty environments. The WT is lifted approx. 1 mm above the conveying level, thus eliminating the load on the conveyor chain during processing.
Positioning accuracy in the conveying direction: ± 0.15 mm (across: ± 0.1 mm, height: ± 0.1 mm) Maximum vertical press force (p = 4 bar): 400 N Maximum holding force (p = 4 bar) in the conveying direction: 300 N Suitable for retrofitting without disrupting the lateral guide The switch bracket can be installed in any position Minimum length of the workpiece pallet in order to incorporate the positioning unit:
Size 65: L = 125 mm
Size 90: L = 125 mm
Two positioning units can be combined for workpiece pallets with L > 250 mm. For this, the position mandrel is removed from one of the PEs and the workpiece pallets are fitted with eccentric centering bushings by the customer. Position inquiry with assembly kit and 2 proximity switches M12x1 on the housing (proximity switches not included in the scope of delivery) or with 3 842 535 150 on the cylinder