CONTROL DEVICE HMD01.1N-W0012-A-07-NNNN

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth HMD01.1N-W0012-A-07-NNNN (R911306439) is a state-of-the-art double-axis inverter belonging to the ctrlX DRIVE series, designed to facilitate the operation of two motors by converting DC voltage into a controlled AC output. This inverter is characterized by its ability to connect to the DC bus of XVE or XVR supply units as well as XCS or XCD converters. It stands out for its standard runtime that supports most drive tasks, with the option of adding function packages for more complex applications. The hardware can be enhanced with ctrlX SAFETY features for safety-critical operations up to Safety Integrity Level (SIL) requirements. This model boasts space-saving attributes due to its double-axis design and scalable power range from x1 to x2 A_peak, allowing for efficient use of space within various application setups. It supports reduced wiring efforts through its compatibility with single-cable technology when used with MSN synchronous servo motors, supporting cable lengths of up to 100 meters without needing additional components. The HMD01.1N-W0012-A-07-NNNN offers versatility in motor encoder selection, including an optional multi-encoder interface compatible with a variety of encoders such as Resolver, AcuroLink, Hiperface, EnDat 2.1, and SSI. This allows for tailored solutions ranging from simple axis command value specification to integrated axis motion systems. In terms of physical specifications, it has a width of 50 mm and a height of 440 mm while offering a maximum current capacity and an internal air cooling system that ensures optimal performance during operation. The switching frequency reaches up to 16 kHz with an output voltage rated at 3xAC (0 - 480) V and an EMC environment compliant with EN standards. It delivers a continuous current of 12 A and weighs approximately 5 kg. The inverter's integrated safety technology ensures compliance up to SIL3 standards and it operates within an International Protection code of IP20, making it suitable for various industrial environments where safety and reliability are paramount.