PS10-32H-0-N-04/02.50 SEQUENCE VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce PS10-32H-0-N-04/02.50 (Material Number: 5637400.02.50) is a screw-in, cartridge-style, direct-acting spool-type hydraulic sequence valve. It is designed to redirect flow to a secondary circuit once a predetermined pressure level is reached in the primary circuit. In its default state, the valve blocks flow from port 3 to port 2 and opens this path once the specified pressure at port 1 is achieved. The valve features an external pilot and internal spring chamber drain, with back pressure at port 2 directly affecting the valve's setting due to its vented spring chamber design. Built for long life, it includes hardened spools and cages and prevents adjustments from being backed out or springs from going solid. This model supports optional spring ranges up to 144.8 bar (2100 psi) and has a pressure rating of up to 206.8 bar (3000 psi), with proof and burst pressures of 482.6 bar (7000 psi) and 688.5 bar (14000 psi), respectively. It allows for a flow rating of up to 30.3 lpm (8 gpm) with maximum internal leakage at \u0394P from ports 2 to 3 of 82 ml/min under full pressure conditions. Operating fluid temperature ranges vary based on seal type, from -40 to 100 \u00b0C with Buna N seals, or -26 to 204 \u00b0C with fluorocarbon seals, while storage temperatures range from -40 to 70 \u00b0C. The unit can handle mineral-based or synthetic fluids with lubricating properties within a viscosity range of 7.4 to 420 cSt and requires an operating contamination level of ISO code 18/16/13. Weighing approximately 0.24 kg (0.54 lb), this model fits into VC10-3 cavities with installation torques between 32.5 to 35.3 N-m for cartridges and up to a maximum allowable torque of about 33.9 N-m for H-style plugs, without orientation restrictions during installation.