PR10-32H-0-N-15/08 REDUCING VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce PR10-32H-0-N-15/08 (5616402.08) is a high-performance, screw-in, cartridge-style hydraulic pressure reducing/relieving valve. This direct-acting, spool-type valve is engineered for secondary circuit pressure regulation in stable input flow systems. In its default state, it allows bidirectional flow from port 2 to port 1 while maintaining a constant drain at port 3. Upon reaching a set pressure at port 1, the valve shifts to block flow at port 2, effectively regulating the pressure at port 1. Additionally, it can relieve excess pressure from port 1 to port 3 over the set reducing pressure range. The valve features non-backable adjustments and optional spring ranges up to 145 bar (2100 psi), with hardened components for durability. The PR10-32H-0-N-15/08 supports a maximum operating pressure of 206.8 bar (3000 psi) at ports 1 and 2 and up to 68.9 bar (1000 psi) at port 3, with proof pressures reaching up to 517.1 bar (7500 psi). It features a burst pressure rating of an impressive 1034 bar (15000 psi). The flow capacity of this valve is rated at up to 30.3 lpm (8 gpm), with internal leakage limited to a maximum of 82 ml/min under specified conditions. Temperature compatibility includes operating fluid temperatures ranging from -40\u00b0C to +100\u00b0C with Buna N seals and up to +204\u00b0C with Viton seals, making it versatile for various operational environments. The valve is compatible with mineral-based or synthetic fluids within a viscosity range of 7.4 to 420 cSt and requires an ISO cleanliness level of no higher than ISO4406:18/16/13 for optimal performance. Installation requires specific torques for both the cartridge and H-style plug installations and can be fitted into VC10-3 cavities without orientation restrictions. This robust hydraulic component weighs approximately between 0.24 kg and can be paired with available seal kits such as SK10-3X-BM for maintenance or replacement needs.