PR10-32A-0-N-04/01.50 REDUCING VLV

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce PR10-32A-0-N-04/01.50 (Material Number: 5616005.01.50) is a high-performance, screw-in cartridge-style hydraulic valve designed for pressure reducing and relieving applications in secondary circuits. This direct-acting spool type valve features an internal pilot and spring chamber drain, ensuring reliable pressure regulation in stable input flow circuits. In its default state, the PR10-32A allows bidirectional flow from port 2 to port 1 while maintaining a constant drain at port 3. Once the pre-set pressure is reached at port 1, the valve shifts to block flow from port 2, regulating the pressure effectively at port 1 and relieving excess pressure to port 3 if necessary. Key specifications include a maximum flow rating of 30.3 lpm (8 gpm) and internal leakage limited to 82 ml/min (5 in\u00b3/min) between ports 2 and 3 at a pressure of 206.8 bar (3000 psi). The valve can handle operating pressures up to 206.8 bar (3000 psi) at ports 1 and 2, with proof pressures reaching up to 517.1 bar (7500 psi). It also boasts an impressive burst pressure of up to 1034 bar (15000 psi). The PR10-32A is adaptable for use across various temperature ranges depending on seal materials: -40 to 100 \u00b0C with Buna N seals, -26 to 204 \u00b0C with Viton seals, and -54 to 107 \u00b0C with polyurethane seals. It fits into VC10-3 cavities using a cartridge installation torque of between 32.5 and 35.3 N-m. The unit weighs approximately 0.25 kg (0.56 lb) and has an internal wetted surface area of about 148 cm\u00b2 (22.9 in\u00b2). It supports mineral-based or synthetic fluids with lubricating properties within a viscosity range of 7.4 to 420 cSt, meeting ISO contamination standards of up to level18/16/13 per ISO4406 for optimal performance in hydraulic systems requiring precise pressure control.