PR10-36H-0-N-15/09 REDUCING VLV.

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce PR10-36H-0-N-15/09 (5615401.09) is a spool-type, pilot-operated hydraulic pressure reducing/relieving valve designed for secondary circuit pressure regulation. This valve features an internal pilot and internal spring chamber drain, allowing it to regulate and relieve pressure efficiently. In its steady state, the PR10-36H permits bidirectional flow from port 2 to port 1 while maintaining continuous drainage at port 3. When a set pressure is reached at port 1, the spool shifts to restrict inlet flow from port 2, thereby regulating the pressure at port 1 and relieving excess pressure from port 1 to port 3. The valve can handle pressures up to 241.3 bar (3500 psi) at ports 1 and 2, with a lower rating of 68.9 bar (1000 psi) for port 3. It boasts a proof pressure of up to 517.1 bar (7500 psi) and burst pressure reaching as high as 1034 bar (15000 psi). The flow capacity is rated at 56.8 lpm (15 gpm), with maximum pilot flow set at 0.170 lpm (0.045 gpm). Temperature handling ranges vary depending on seal type: -40 to 100 \u00b0C with Buna N seals, -26 to 204 \u00b0C with fluorocarbon seals, and -54 to 107 \u00b0C with polyurethane seals. The PR10-36H also has an ambient temperature range of -40 to 70 \u00b0C for operation and storage alike. The unit's fluid compatibility includes mineral-based or synthetic fluids with lubricating properties within a viscosity range of 7.4 to 420 cSt. Installation specifications include a VC10-3 cavity requirement with cartridge installation torque between 33.9 to 67.8 N-m depending on the component involved, ensuring secure installation without orientation restrictions.