PR10-36H-0-N-15/04 REDUCING VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce PR10-36H-0-N-15/04 (Material Number: 5615401.04) is a spool-type, pilot-operated hydraulic pressure reducing/relieving valve designed for secondary circuit pressure regulation. It features an internal pilot and spring chamber drain, allowing for bidirectional flow from port 2 to port 1 while continuously draining the spring chamber at port 3. Upon reaching a set pressure at port 1, the spool shifts to limit inlet flow from port 2, thereby regulating the pressure at port 1 and relieving excess pressure from port 1 to port 3. The valve is equipped with adjustments that prevent springs from going solid and cannot be backed out of the valve. It offers optional spring ranges up to 207 bar (3000 psi) and includes hardened spool and cage components for extended durability. The valve's pressure ratings are as follows: Port 1 and Port 2 can handle up to 241.3 bar (3500 psi), while Port 3 is rated for up to 68.9 bar (1000 psi). The proof pressure stands at an impressive 517.1 bar (7500 psi), with a burst pressure of up to 1034 bar (15000 psi). The flow rating is set at a maximum of 56.8 liters per minute (15 gallons per minute), with a maximum pilot flow of 0.170 liters per minute (0.045 gallons per minute) under specified conditions. Temperature capabilities include an operating fluid temperature range of -40 to +100 \u00b0C (-40 to +212 \u00b0F) with Buna N seals, extending further with other seal options, and storage temperatures between -40 to +70 \u00b0C (-40 to +160 \u00b0F). Compatible with mineral-based or synthetic lubricating fluids, it supports fluid viscosities ranging from 7.4 to 420 cSt and maintains a cleanliness level of ISO code18/16/13. Installation requires a VC10-3 cavity with cartridge installation torque between33.9 to67.8 N-m(25to50 ft-lb). Seal kits are available under the code SK10-3X-BM, accommodating different seal options as needed.