PR10-36A-0-N-30/16 REDUCING VAVLE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce PR10-36A-0-N-30/16 (Material Number: 5615002.16) is a spool type, pilot-operated hydraulic pressure reducing/relieving valve designed for secondary circuit pressure regulation. This valve features an internal pilot and spring chamber drain, enabling bidirectional flow from port 2 to port 1 in its steady state while maintaining constant drainage at port 3. When the predetermined pressure at port 1 is reached, the spool shifts to regulate the inlet flow from port 2 and relieve excess pressure from port 1 to port 3. The valve includes adjustments that cannot be backed out, preventing springs from solidifying, and offers optional spring ranges up to 207 bar (3000 psi). Constructed with a hardened spool and cage for longevity, it fits industry-common sizes. The PR10-36A-0-N-30/16 can withstand a maximum pressure rating of 241.3 bar (3500 psi) at ports 1 and 2, with a lower rating of 68.9 bar (1000 psi) at port 3. It has proof and burst pressures of 517.1 bar (7500 psi) and 1034 bar (15000 psi), respectively. With a flow rating of up to 56.8 lpm (15 gpm), this valve allows for efficient fluid control, while the maximum pilot flow reaches up to 0.170 lpm (0.045 gpm). It operates effectively across various temperature ranges depending on seal material: -40 to 100 \u00b0C with Buna N seals, -26 to 204 \u00b0C with fluorocarbon seals, and -54 to 107 \u00b0C with polyurethane seals. Designed for use with mineral-based or synthetic fluids possessing lubricating properties, it accommodates fluid viscosity ranging from 7.4 to 420 cSt and maintains an operating contamination level of ISO code18/16/13 per ISO4406 standards when accounting for tank pressure addition. The unit weighs between approximately 0.25 kg (0.55 lb) and comes with installation specifications including a VC10-3 cavity type requiring a cartridge installation torque between33.9to67.8N-m(25to50ft-lb).