CR10-28H-8T-N-30/24 CROSS OVER REL

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce CR10-28H-8T-N-30/24 (5613972.24) is a screw-in, cartridge-style, direct-acting, differential area, poppet-type bidirectional hydraulic relief valve designed to manage pressure in hydraulic systems effectively. When the pressure at either port surpasses the nominal setting value, this valve transmits flow to the opposite port, maintaining system stability. It features a hardened spool and cage for extended durability and incorporates adjustments that prevent springs from going solid or being backed out of the valve. The CR10-28H-8T-N-30/24 is rated for a maximum pressure of 241.3 bar (3500 psi), with a proof pressure of 345.6 bar (5000 psi) and a burst pressure of 896.3 bar (16000 psi). The valve's reseat pressure is set at 90% of crack pressure at a flow rate of 0.95 lpm (0.25 gpm), with crack pressures up to 10.5 bar (150 psi) in both directions. This hydraulic relief valve supports flow rates up to 60 lpm (16 gpm) with internal leakage limited to 33 ml/min when reseated to 80% of crack pressure. It operates within fluid temperature ranges from -40 to 100 \u00b0C (-40 to 212 \u00b0F) with Buna N seals, -26 to 204 \u00b0C (-15 to 400 \u00b0F) with fluorocarbon seals, and -54 to 107 \u00b0C (-65 to 225 \u00b0F) with polyurethane seals. The unit is compatible with mineral-based or synthetic fluids possessing lubricating properties and can accommodate fluid viscosities ranging from 7.4 to 420 cSt. The CR10-28H-8T-N-30/24 fits into VC10-2 cavities and requires an installation torque between 33.9 N-m and 36.6 N-m for optimal performance, ensuring reliable operation in various hydraulic applications without any orientation restrictions during installation.