RVD50-20P-0-V-32/M200 RELIEF

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce RVD50-20P-0-V-32/M200 (5612606V.M200) is a screw-in, cartridge-style, direct-acting poppet-type relief valve designed to serve as a pressure-limiting device for hydraulic circuit protection. This robust valve effectively blocks flow from port 1 to port 2 until the pressure at port 1 reaches a level sufficient to unseat the poppet, thereby providing rapid response to load changes. The RVD50-20P-0-V-32/M200 is engineered for low hysteresis, minimal pressure rise, and reduced internal leakage, ensuring efficient performance in demanding applications. Key features include an adjustment mechanism that remains stable during pressure setting changes and hardened components for enhanced durability. It offers optional spring ranges up to 345 bar (5000 psi) and can withstand pressure ratings of up to 413.7 bar (6000 psi), with proof and burst pressures of 785.4 bar (11000 psi) and 1515.8 bar (22000 psi), respectively. This cartridge accommodates flow rates up to 113.6 lpm (30 gpm) at maximum pressure from port 1 to port 2 while maintaining low internal leakage of only 0.25 ml/min (5 drops/min). The valve supports a wide operating fluid temperature range depending on the seal type: -40 to 100 \u00b0C with Buna N seals, -26 to 204 \u00b0C with fluorocarbon seals, and -54 to 107 \u00b0C with both polyurethane and urethane seals. It also boasts excellent corrosion resistance withstanding up to 960 hours in salt spray conditions per ASTM B117 standards. The RVD50-20P-0-V-32/M200 is compatible with mineral-based or synthetic fluids possessing lubricating properties within a viscosity range of 7.4 to 420 cSt, adhering to a maximum contamination level of ISO 4406 class 18/16/13. Installation requires VC10-2 cavities with specified torque settings between 63.7 and 71.9 N-m (47 to 53 ft-lb), and there are no orientation restrictions for mounting this versatile relief valve in various hydraulic systems.