RV10-20H-0-N-12/M40 RELIEF VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce 5610406.M40 (5610406.M40) is a screw-in, cartridge-style, direct-acting poppet type hydraulic relief valve designed to serve as a pressure-limiting device for common hydraulic circuit protection. This valve is suitable for use with mineral-based or synthetic hydraulic fluids that possess lubricating properties. Functionally, the RV10-20X model blocks flow from port 1 to port 2 until the pressure at port 1 is sufficient to displace the poppet from its seat. It exhibits a rapid response to load changes and is ideal for typical hydraulic circuits requiring low internal leakage. While this valve can be used in both existing and new applications, it should be noted that the RVD58-20 is recommended as a superior alternative in most scenarios due to its enhanced features. However, the RV10-20X remains a reliable choice for applications where a smaller valve with comparable pressure and flow ratings is required. It offers competitive cost advantages and does not include dynamic seals, making it efficient for specific uses. The corrosion-resistant version GRV10-20 of this valve is not advised for crossover applications.