RV10-20F-0-N-23/16 RELIEF VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce 5610307.16 (5610307.16) is a screw-in, cartridge-style, direct-acting, poppet-type hydraulic relief valve designed for pressure limiting in hydraulic circuits. This component is intended for use with both mineral-based and synthetic hydraulic fluids that possess lubricating properties. The RV10-20X model effectively blocks flow from port 1 to port 2 until the pressure at port 1 is sufficient to unseat the poppet, thereby allowing fluid passage. It is known for its rapid response to load changes and minimal internal leakage, making it suitable for typical hydraulic circuit applications where these attributes are critical. Despite being an older model, it remains a reliable choice for existing systems and new installations that require dependable pressure relief capabilities. However, users are advised that the RVD58-20 is considered a superior alternative in many scenarios due to its better pressure rise characteristics and smaller size while maintaining competitive cost-effectiveness. It's important to note that the GRV10-20 corrosion-resistant version of this valve is not recommended for crossover applications.