RV10-20C-0-N-33/18 RELIEF VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce 5610203.18 (5610203.18) is a screw-in, cartridge-style, direct-acting, poppet-type hydraulic relief valve designed for pressure limiting in hydraulic circuit protection. This valve is suitable for use with both mineral-based and synthetic hydraulic fluids that possess lubricating properties. Its primary function is to block flow from port 1 to port 2 until the pressure at port 1 reaches a level sufficient to unseat the poppet, thereby allowing fluid passage. The RV10-20X model is noted for its rapid response to load changes and low internal leakage, making it ideal for typical hydraulic circuits that demand these capabilities. Although it can be used in existing and new applications, Hydraforce suggests considering the RVD58-20 as a superior alternative due to its enhanced features such as better pressure rise characteristics and smaller size while maintaining comparable pressure and flow ratings. However, it should be noted that this newer model is not a direct drop-in replacement. The RV10-20X should not be used in crossover applications, especially when corrosion resistance is required; instead, the GRV10-20 version might be considered under such conditions albeit with caution regarding its application suitability.