RV10-20A-0-NC-33/M180 RELIEF VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce 5610004.M180 (5610004.M180) is a screw-in, cartridge-style, direct-acting, poppet-type hydraulic relief valve designed to serve as a pressure limiting device for common hydraulic circuit protection. This valve is suitable for use with mineral-based or synthetic hydraulic fluids that possess lubricating properties. The RV10-20X model effectively blocks flow from port 1 to port 2 until the pressure at port 1 is sufficient to move the poppet from its seat. Its design ensures a rapid response to load changes in typical hydraulic circuits while maintaining low internal leakage. Although this model can be replaced functionally by the newer RVD58-20 in most applications, it's important to note that it is not a direct drop-in replacement due to differences in size and other characteristics. The RV10-20X offers comparable pressure and flow ratings, response rates, and better pressure rise characteristics compared to newer models but lacks dynamic seals. However, it remains competitive in cost and continues to be suitable for existing applications where its specific attributes are required. This valve should not be used in crossover applications when considering the corrosion-resistant version GRV10-20.