RV10-20A-0-N-33/23 RELIEF VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce RV10-20A-0-N-33/23 (Material Number: 5610003.23) is a screw-in, cartridge-style, direct-acting, poppet-type hydraulic relief valve designed to serve as a pressure limiting device for standard hydraulic circuit protection. This valve is suitable for use with both mineral-based and synthetic hydraulic fluids that possess lubricating properties. It effectively blocks flow from port 1 to port 2 until the pressure at port 1 reaches a level sufficient to unseat the poppet, allowing for quick response to load changes while maintaining low internal leakage. The RV10-20A-0-N-33/23 can handle a pressure rating of up to 228 bar (3300 psi) at port 1 and has a proof pressure of 517.1 bar (7500 psi), with burst pressure reaching up to 1037.7 bar (15000 psi). The valve's crack pressure is defined as the point where pressure becomes evident at a flow rate of 0.95 lpm from port 1 to port 2, with reseat pressure nominally set at 85% of the crack pressure. With a flow rating of up to 38 lpm at maximum pressure and minimal internal leakage of approximately five drops per minute at nominal settings, this valve ensures efficient performance in various hydraulic applications. It operates effectively within an operating fluid temperature range of -40 to 100 \u00b0C with buna N seals and offers corrosion protection through type III clear zinc plating per ASTM B633 standards. The RV10-20A-0-N-33/23 is installed in VC10-2 cavities using cartridge installation torque between 33.9 to 36.7 N-m and supports fluid viscosity ranges from 7.4 to 420 cSt, ensuring compatibility with diverse fluid types while maintaining optimal functionality in demanding environments.