PS08-30B-0-N-24/12 SEQUENCE VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce PS08-30B-0-N-24/12 (5607104.12) is a direct-acting, spool-type hydraulic sequence valve designed to efficiently control the flow of hydraulic fluid within a system. This model features an internal pilot and spring chamber drain, facilitating the redirection of oil to a secondary circuit once a predetermined pressure is reached in the primary circuit. In its default state, it blocks flow at port 1 while permitting flow from port 2 to port 3. Upon reaching the set pressure at port 1, it shifts to allow flow from port 1 to port 2. The PS08-30B is equipped with non-backable adjustments that prevent springs from becoming solid and offers optional spring ranges up to 165.5 bar (2400 psi). Constructed with a hardened spool and cage, this valve promises durability and longevity. The valve has a pressure rating of up to 241.3 bar (3500 psi) for all ports, with proof and burst pressures reaching 482.6 bar (7000 psi) and 896.3 bar (13000 psi), respectively. It supports a flow rating of up to 22.7 lpm (6 gpm) and maintains maximum internal leakage at just 82 ml/min (5 in\u00b3/min). The PS08-30B operates efficiently across various temperature ranges depending on seal material: -40 to 100 \u00b0C with buna N seals, -26 to 204 \u00b0C with viton seals, and -54 to 107 \u00b0C with polyurethane seals. With compatibility for mineral-based or synthetic fluids possessing lubricating properties, it accommodates fluid viscosities ranging from 7.4 to 420 cSt while maintaining an operating contamination level of ISO code 18/16/13 or cleaner. Weighing approximately 0.26 kg (0.58 lb), this valve fits into an industry-standard VC08-3 cavity size without orientation restrictions and requires an installation torque between 25.8 to 28.6 N-m (19 to 21 ft-lb). Optional seal kits are available for customization based on specific sealing needs.