SV10-22-8T-N-24DG SOLENOID VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce SV10-22-8T-N-24DG (5020628) is a solenoid-operated, 2-way, normally closed, poppet-type screw-in hydraulic cartridge valve. This valve features a standard SV10-22 configuration with manual override options and is designed for low leakage blocking and load holding applications. The operation of the valve allows it to act as a check valve when deenergized, permitting flow from port 1 to port 2 while blocking the opposite flow. Upon energization, the poppet lifts to facilitate bidirectional flow between ports 1 and 2. This model boasts a continuous-duty rated coil and a hardened seat that ensures long life and minimal leakage. It offers optional coil voltages and terminations along with efficient wet-armature construction. The cartridges are interchangeable across different voltages, featuring a unitized, molded coil design. Additionally, there is an option for manual override and waterproof E-Coils that are rated up to IP69K. The Hydraforce SV10-22-8T-N-24DG can handle pressures up to 241 bar (3500 psi) with proof pressure of 345 bar (5000 psi) and burst pressure reaching up to 896 bar (13000 psi). Flow characteristics can be referenced via performance graphs provided by the manufacturer. It ensures maximum internal leakage of only five drops per minute at 207 bar (3000 psi). This valve accommodates a wide range of operating temperatures depending on seal material—ranging from -40°C to +100°C with Buna N seals, -26°C to +204°C with fluorocarbon seals, and -54°C to +107°C with polyurethane seals. Designed for versatility in hydraulic fluid applications, it supports mineral-based or synthetic fluids with lubricating properties within a viscosity range of 7.4 to 420 cSt. The maximum contamination level is specified as 20/18/14 per ISO 4406. Its robust design includes options for various installations and accessories like seal kits and housings tailored for specific needs in hydraulic systems.