4WE6J6X/EW110N9DAL/B10=AN

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth 4WE6J6X/EW110N9DAL/B10=AN (R901510545) is a high-performance directional spool valve designed for controlling the start, stop, and direction of fluid flow within a hydraulic system. This valve is characterized by its housing, electromagnets, control spool, and return springs. It operates as an electromagnetic component that shifts the control spool to direct fluid flow when energized; in its deenergized state, the control spool returns to its initial position by the return springs except for specific versions without spring return. This particular model is versatile with two switching positions and features two high-power solenoids that can be optionally rotated by 90 degrees. It offers flexibility in electrical connections, allowing for either single or central connections. Additionally, an auxiliary actuation mechanism is available for manual operation in the absence of magnet supply. For ensuring proper functioning within hydraulic systems, it's crucial that they are adequately vented. The 4WE6J6X/EW110N9DAL/B10=AN valve also provides options for spool position monitoring and comes with CE conformity suitable for electrical voltages higher than 50 VAC or 75 VDC. The solenoid coil carries a UR marking compliant with UL edition standards and has optional approval according to CSA C22.2 No. 0. Moreover, this model accommodates various porting patterns conforming to ISO standards and can be equipped with or without a locating hole. Its design may include a throttle insert when operating conditions exceed the valve's performance limit during switching processes. It is important to note that pressure peaks in the drain line can cause unintended control spool movements in versions with detent; therefore, separate return lines or check valves are recommended to mitigate this issue. Lastly, users should be aware that internal leakage is inherent to the design principle of these valves and may increase over their service life.